Nimi/Yrityshaku: Kuntakohtaiset palvelut:     

24h Nettikauppa
Ilmoituskanava
Keskusteluryhmät
Uutiset
- Kuninkuusravit 2012
- Ohjeet Tiedotteet
- 24hravi uutiset
- Hevostietoutta
- Uutisarkisto
Linkit ja viitteet
24hNettiKauppa
24hravi.net Vieraskirja
Aikataulut
Eläinten Terveyspalvelut
Hakukoneet
Hevosjalostusliitot
Hevoslehdet
Hevostarvikkeet
Hevosyhdistykset
Hevosystäväseurat
Hippos
Kuvagalleria
Lehdet
Lomakkeet
Lomalle!
Näyttävät Kotisivut
Oppilaitokset
Palvelunhallinta
Pankit
Raviradat
Ravisää
TV ja Radio
Veikkaus/Vedonlyönti
Yrittäjän hyötylinkit

 
 Uutisten kommentit:


Bennet13. Lokakuu 2012 klo. 03:01 
Knowledge wants to be free, just like these artclies!
Kemon15. Lokakuu 2012 klo. 04:04 
Thought it woludn't to give it a shot. I was right.
Shamxal08. Tammikuu 2013 klo. 11:30 
My porlebm was a wall until I read this, then I smashed it.
Lorena14. Joulukuu 2014 klo. 07:10 
This is the perfect way to break down this inmrafotion.
Kathy15. Joulukuu 2014 klo. 03:18 
Y no hay que olvidarse de la biela en una 4 tpmieos, por que en KTM no se pero en la WR 450 que yo tengo recomiendan cambiarla cada 6000 km esto me lo dijeron en el servicio oficial Yamaha por eso la biela de la Yamaha vale 70 euros pero cambiarla creo que me dijeron 360 euros, vamos que yo tengo una 4 tpmieos y mi hemano una Gas Gas 250 ec y si que mantenimiento tiene cada moto.
Joje24. Syyskuu 2015 klo. 18:24 
The wooden obesrvation tower at Helsinki Zoo in Finland was the winning design in a competition held for architectural students of Helsinki University of Technology. Situated on a small island just outside the city, and built on one of its highest hills, it provides visitors to the zoo with panoramic views over the sea and surrounding area. LUSAS Civil Structural was used in the design and analysis to prove the safety and structural behaviour under imposed loading.OverviewThe tower is a 10m high, two storey, irregular-shaped wooden lattice structure built from 72, twelve metre long, glue-laminated battens. The battens were factory bent to 7 different preformed shapes ready for assembly but to achieve the final shape they had to be bent and twisted further during the construction process. The wooden members are connected with double-sided nail plates and 10 mm through-bolts to form a space truss. In all, there are more than 600 joints in the tower. Two floor levels are supported by edge beams at the perimeter and connected to the truss by deck bolts to give the necessary horizontal stiffness and support to the lattice members. A steel framed opening in the shell provides access to wooden stairs. The whole structure rests on a hidden reinforced concrete foundation via specially designed steel joints.For more on modelling and analysis check out the Lusas website
Ashok24. Syyskuu 2015 klo. 18:58 
The tower was the outcome of an irnitnateonal student competition and was to stand in a prominent position high above the sea. The prizewinners justified the free curves of their design by arguing that they had a greater affinity to man and nature and were more economical than rectilinear forms. In order to avoid problems in implementing the scheme, there was a protracted trial phase, with 3-D simulations and models. The finely articulated, self-supporting net-like structure of the tower consists of 72 curved wood strips. After extensive tests, it was decided to have these6 ? 6 cm laminated members bent to seven different radii at works and to shape them to their final curvature by steam treatment on site. The members were simply bolted together and braced in part with nailed plates. To stress the transparency of the outer skin, the internal platforms and stairs were executed in solid laminated timber, thereby forming independent spatial entities within the overall tower space. The timber members were treated with linseed oil as the sole form of protection.For article with details (plan/sections) go to the DETAIL website
Ione13. Joulukuu 2015 klo. 00:20 
The load bearing sturutcre consists of 72 long battens, with a section of 60mmx60mm, that are bent and twisted on the site from seven pre-bent types. Over 600 bolted joints hold the shell sturutcre together.Having no weather protection the wood is treated with a linen oil-based wood balm with UV-protection.
Susy21. Heinäkuu 2016 klo. 11:37 
Great thikning! That really breaks the mold!




 Kommentoi aihetta:
Nimi    E-mail
 
24h Kanta-Asiakkaat

   Chatroom
  Valitse chatti:

Tunnuksesi:

  

 
© 2002 - 2004 24h Finland Oy. Site created by Northside Solutions